Grundfos JP4-47 Water Transfer Pump

Grundfos JP 4-47 single-stage centrifugal jet transfer pump

In Store Only

JP 4-47 S-BBVP

Grundfos JP 4-47 S-BBVP is a self-priming single-stage centrifugal jet pump with axial inlet and radial outlet for easy adaption to local piping system. The JP pump is ideal for transferring water from wells or ground tanks in a large variety of installations and it has excellent suction capacity.

The JP pump is designed for a long and trouble-free operation. The overall design is robust with excellent corrosion resistance ensured by the stainless steel pump housing, composite impeller and paint application by electrophoresis. JP is small and compact with a lifting handle that makes the pump handy and easy to carry. The compact pump features a build in ejector with guide vanes. This ensures optimum self-priming properties, featuring a suction-lift up to 8 meters. The self-priming pump also ensures a stable operation as is it able to lift liquid from below the inlet level and can handle a mix of air and liquid until the pump reaches a fully-primed pumping condition.

The JP pump has built-in thermal protection, which immediately stops the pump if it overheats. The motor is air cooled and equipped with oversized, sealed, greased-for-life ball bearings to ensure silent operation and minimum service.

Specification Name Detail
roduct name JP 4-47 S-BBVP
Product No 99458783
EAN number 5713829460256
Technical
Rated flow 4 m³/h
Head max 47 m
Primary shaft seal BBVP
Approvals on nameplate CE,WM,C-TICK
Curve tolerance ISO9906:2012 3B
Model A
Rated driver speed 2800 rpm
Materials
Pump housing Stainless steel
Pump housing EN 1.4301
Pump housing AISI 304
Impeller Composite
Material code S
Installation
Range of ambient temperature 0 .. 40 °C
Maximum operating pressure 6 bar
Maximum permissible inlet pressure 1 bar
Pump inlet G1
Pump outlet G1
Liquid
Pumped liquid Water
Liquid temperature range 0 .. 40 °C
Selected liquid temperature 20 °C
Density 998.2 kg/m³
Electrical data
Power input - P1 850 W
Rated power - P2 0.56 kW
Mains frequency 50 Hz
Rated voltage 1 x 230 V
Rated current 3.8 A
Starting current 11.3 A
Capacitor size - run 13 µF/450 V
Enclosure class (IEC 34-5) IP44
Insulation class (IEC 85) F
Type of cable plug AUS
Cable Y
Controls
Presscontrol without press control
Switch on/off switch not included
Others
Net weight 8 kg
Gross weight 10 kg
Shipping volume 0.026 m³
Suggestions
Puretec PL101

Pleated Sediment Cartridge, 10 inch, 10 ...

$24.00
Puretec CB951 Carbon Block Filter

Puretec Carbon Block Cartridge, 10 Inch, 0.5 ...

$82.00
Regent 5.5HP GX160 Single Impellor Fire Pump

Regent Fire Fighting Genuine Honda Motor 5.5HP, GX160, ...

In Store Only
Puretec PL051 Pleated 5Micron Sediment Cartridge

Pleated Sediment Cartridge - Washable 10" 5 ...

$24.00