The BasicLine by Grundfos UNILIFT CC is a lightweight single-stage drainage pump with a semi-open impeller. They are designed for pumping drain water and grey wastewater containing particles up to a size of up to 10 mm. The suction strainer at the bottom of the pump prevents particles larger than the pump is designed for from entering. The strainer is made of stainless steel, while the main pump parts, e.g. the sleeve and pump housing, are made of moulded composite materials.
The UNILIFT CC can pump down to a water level of 3 mm above the floor by removing the strainer and can be used in permanent installations or as a portable pump.
Prevention of backflow
The pump is supplied with an adapter and a non-return valve to prevent backflow through the pump when it stops.
The materials of the pump ensure excellent corrosion resistance. Furthermore, the CC 7 and 9 have a built in V-ring mechanical shaft seal which offers wear resistance and a long operating life.
Thermal overload protection
The single-phase version is effectively protected against any accidental overload, by built-in thermal protection. This means that no additional motor protection is required.
In case the motor cuts out due to thermal overload, the motor automatically starts again when it has cooled to normal temperature.
Handy and easily transportable
The light weight of the pump and the carry handle mounted on the housing make it handy and easily transportable.
The pump has a float switch for automatic on/off operation between two liquid levels.
The UNILIFT CC 7 features a self-venting valve. Place the pump underwater, engage the power, and relax. The self-venting valve located in the handle prevents air from getting trapped in the pump.
Includes multiple adapter for thread sizes from 3/4” to 1/1/4”
|Liquid temperature||0 °C to 40 °C|
|Max. particle size||Ø10 mm|
|pH concentration||4 to 9|
|Max. installation depth||10 m|
|Mains voltage||1 x 240 V, 50 Hz|
|Approvals and markings||VDE, CSA, GOST and LGA according to DIN EN 12050-2|